Tuesday 13 November 2018

HOW TO SELECT POWER BANK BASED ON YOUR PHONE BATTERY

Today, we are using our Smartphone in every situation. Whether you want to search something or you want to share your current location. While doing all these activities, you will definitely lose your battery life of your Smartphone. You need to have power bank so that you don’t run out of battery. You definitely don’t want that the battery of your Smartphone to be exploded in your pocket. So, it is very important that you will choose the power bank according to your battery life. However, branded power bank share some common properties. The most common properties are voltage and current. You can also go for some bulk power banks with better features.




Voltage


There are few factors that you need to consider while buying a power bank and considering voltage is a must. Never go for power bank whose voltage is higher than your mobile battery. If you choose the power bank whose voltage is higher than your mobile battery then the consequences will make you sad. Make sure that you choose the power bank according to your battery voltage.


Current


Current is another factor that determines the charging time. You need to choose a power bank whose current rating is either adapter. Choose a power bank which is higher or equal to the battery which will get charged. If you choose that the current rating is lower than a battery, then it’s going to take lots of time for charging.

Marking Capacity


Before buying any power bank, make sure that you have to check the marking capacity. The total capacity of the power bank is varied from marking capacity. Make sure that you select a marking capacity which is suitable for your Smartphone. There are so many generic power banks which are sold by using this technique.

Conversion Rate


You need to keep this in your mind that not all power banks produce the same output as printed on the catalog. You need to check this very carefully. Conversion is one factor that determines the output of the power bank. For example: If the conversion rate is 80% then its output is 80000 mAh.


1 comment: